…turn signals (flush mount available) * Horn * Ni-Cad battery (9 oz)Keeps the lights working when the bike is off * Rectifier/regulator (keeps the battery charged) * Wiring harness * Switch panelHigh beam indicator light, turn signal switch, horn, headlight and kill switch * Parts bag contains all necessary…

…Bike specific kits - wire lengths and connectors designed per bike. Race lighting will work on bikes with this dual sport kit. * D.O.T. halogen hi/low glass lens headlight * L.E.D. taillight * D.O.T. turn signals (flush mount available) * Horn * Ni-Cad battery (9 oz)Keeps the lights working when the…

…wire nuts, cables, cable ties and installation instructions * Wires into brake system for strobing light effect * Water resistant * Easy mounting and works with all 12 volt vehiclesNOTES: AUXILIARY LIGHTING LAWS VARY FROM STATE TO STATE. PLEASE CHECK WITH LOCAL LAW ENFORCEMENT BEFORE ORDERING

…mounting hardware * 2 inch square lamps house LED lighting of a very pure, white light that runs at about 5,000 Kelvin brightness and 0.75 amps each * D1 lighting uses 10 watt LED technology, producing 900 lumens Kit components include: * 2 Denali D1 LED light pods * Full wiring harness with relay and switch…

* Includes tail/stop light, stop light switch, horn with switch, mirror and all necessary wiring * May make ATV legal for street use in some states, check state requirements * Note: Outer ring of horn and most of mirror is silver (not black)

…turn signals (flush mount available) * Horn * Ni-Cad battery (9 oz)Keeps the lights working when the bike is off * Rectifier/regulator (keeps the battery charged) * Wiring harness * Switch panelHigh beam indicator light, turn signal switch, horn, headlight and kill switch * Parts bag contains all necessary…

…seen on the open road * This kit allows you to change your stock turn signals into Run-Turn-Brake lights with easy Plug and Play installation * The optional flash mode flashes the taillights when the brakes are hit - catching the attention of anyone behind you * This kit includes Plug and Play Run-Turn…

* Made from 1/8" ABS plastic, similar to OE Plastics * Color matched to OE specs using high quality automotive paints * Uses stock tail light assembly * Turn signals not included Note: Image for reference only. Product may vary in color and size depending on vehicle.

* Light output is 3 times that of a halogen bulb and 10 times that of a regular bulb * Plug-n-play installation * 6000K light temperature will give you the whitest light possible or 8000K will give you a blue colored light * Kit comes complete with a fused wiring harness, H.I.D. Xenon bulb, super slim…

…mounting for holding indicator lights and your ignition key * Bracket mounts lights to your handlebar so light points in the direction you are steering * Works great with PIAA 510ATP or 005 light kit * Easy to install in stock location using existing hardware * Lights sold separately

…3M VHB adhesive * Light Dimensions and Specifications: * Power Draw: 30 Watts * Run Time (using 6600mAh battery): 2.5 hours * Lumens: 1850 lm * Size: 2.5" x 3.8" (63mm x 95mm) * Weight: 13 oz * Beam Color: 5600K * Beam Angle: 24 * Power Requirement: 12V DC, polarity protected * Kit Includes: * Eclipse…

* Includes: Headlight, handlebar switch, LED taillight, brake light, and brake switch. * Free form reflector design. Offers superior optics and brightness than other offroad headlights * Headlight shell has a more current shape with plenty of room for instrumentation * Fully D.O.T. approved with a 55…

…with a full width radius, allows lights to be positioned to cast a wide pattern for optimal lighting range * Plug and Play installation is simple * 12-volt DC * 55 watt off road style lights are fully adjustable * Includes curved light bar with machined clamps, lights and a plug in O.E.M. style wire loom…

…with a full width radius, allows lights to be positioned to cast a wide pattern for optimal lighting range * Plug and Play installation is simple * 12-volt DC * 55 watt off road style lights are fully adjustable * Includes curved light bar with machined clamps, lights and a plug in O.E.M. style wire loom…

…Edge tail light holder kit designed for YAMAHA WR250R/X * Comes with Edge tail light, tail light bracket, license plate and flasher brackets * Shorter than OEM license brackets, provides cool looking and good center of mass * Special screw holes to enable proper setting of the tail lights * Flasher stay…

* This Wire Harness is required to install the Lock & Ride Light Bar Kit * It provides all the electrical connections required to connect the lights * Will work on a RZR or RANGER